|
GlobLib
HAL and API libraries for MCUs and hardware.
|
|
GlobLib
HAL and API libraries for MCUs and hardware.
|
Header file for stm32f103cb timers. More...
#include "stm32f103cb_gpio.h"#include "stm32f103cb_debug.h"#include "stm32f103cb_clock.h"#include <libopencm3/stm32/timer.h>#include <stdint.h>Go to the source code of this file.
Enumerations |
Functions | |
| mcu_error | TIMER_setupCount (timer_main timerNumber, uint32_t frequency, void(*handler)(void)) |
| Initialize given timer for standard count with interrupt on timeout. More... | |
| mcu_error | TIMER_setupIC (timer_main timerNumber, timer_channel timerChannel) |
| Initialize given timer for input capture. More... | |
| mcu_error | TIMER_setupPWM (timer_main timerNumber, timer_channel timerChannel, uint32_t frequency, uint8_t duty) |
| Initialize given timer for PWM mode. More... | |
| mcu_error | TIMER_setupPulse (timer_main timerNumber, timer_channel timerChannel, uint32_t frequency, uint32_t pulse) |
| Initialize given timer for Pulse mode. More... | |
| mcu_error | TIMER_setPeriod (timer_main timerNumber, uint32_t period) |
| Set the period for the timer. (in microseconds) More... | |
| mcu_error | TIMER_setFrequency (timer_main timerNumber, uint32_t frequency) |
| Set the frequency for the timer. (in hertz) More... | |
| mcu_error | TIMER_setDuty (timer_main timerNumber, timer_channel channel, uint8_t duty) |
| Set the duty cycle for the waveform (PWM only, 0 - 100%). More... | |
| mcu_error | TIMER_setPulse (timer_main timerNumber, timer_channel channel, uint32_t pulse) |
| Set the pulse width for the output. (in microseconds) More... | |
| uint16_t | TIMER_getCount (timer_main timerNumber) |
| Get the current value of a running timer. More... | |
| mcu_error | TIMER_setCount (timer_main timerNumber, uint16_t count) |
| Set the current value of a running timer. More... | |
| uint16_t | TIMER_getIC (timer_main timerNumber, timer_channel channel) |
| Get the last input capture time from a channel of a timer. More... | |
| mcu_error | TIMER_enableISR (timer_main timerNumber, void(*handler)(void)) |
| Set the ISR target for timeout. More... | |
| mcu_error | TIMER_disableISR (timer_main timerNumber) |
| Disable the timeout IRQ. More... | |
| mcu_error | TIMER_pause (timer_main timerNumber) |
| Pause an already running timer. More... | |
| mcu_error | TIMER_resume (timer_main timerNumber) |
| Resume a paused timer. More... | |
Header file for stm32f103cb timers.
Definition in file stm32f103cb_timer.h.
1.8.11