DEBUG

This module contains error code definitions for all libraries. More...

Files
file	attiny13a_debug.h
	Header file for attiny13a DEBUG.

Enumerations

Detailed Description

This module contains error code definitions for all libraries.

Each low level module has an error handling feature. The return values of setup and configuration functions can be checked with values set out in this module.

Author

Stuart Ianna

Version

0.1

Date

October 2018

Copyright

GNU GPLv3

Warning

None

Bug:

None

Verified Compilers

• avr-gcc 4.9.2

Enumeration Type Documentation

enum mcu_error

Error enumerators for the Debug peripheral.

These values are used to quantify errors which occur during configuration of each module.

Enumerator
E_GPIO_NOERROR	ERROR GPIO: No Error.
E_GPIO_ISR	ERROR GPIO: ISR EXTI line in use.
E_GPIO_PORT	ERROR GPIO: Port doesn't exist.
E_GPIO_PIN	ERROR GPIO: Pin doesn't exist.
E_GPIO_TRIGGER	ERROR GPIO: ISR trigger doesn't exist.
E_MCU_UNDEFINED	ERROR MCU: Unknown error code.
E_USART_NOERROR	Error USART: No Error.
E_USART_NOPORT	Error USART: Port doesn't exist.
E_USART_NOBAUD	Error USART: Baud rate not available.
E_USART_NOSTOP	Error USART: Stop bits don't exist.
E_USART_NODATA	Error USART: Data frame not available.
E_USART_NOPARITY	Error USART: Parity option not available.
E_USART_NOINT	Error USART: Interrupt option doesn't exist.
E_I2C_NOERROR	ERROR I2C: No Error.
E_I2C_PORT	ERROR I2C: Port doesn't exist.
E_I2C_WRITE	ERROR I2C: Timeout during put()
E_I2C_READ	ERROR I2C: Timeout during get()
E_I2C_START	ERROR I2C: Timeout during start()
E_I2C_STOP	ERROR I2C: Timeout during stop()
E_CLOCK_NOERROR	Error clock: No error.
E_CLOCK_NOSPEED	Error clock: Clock speed doesn't exist.
E_SYSTICK_NOERROR	Error systick: No error.
E_SYSTICK_TOOLONG	Error systick: Timeout value is too short.
E_TIMER_NOERROR	Error timer: No error.
E_TIMER_NOTIMER	Error timer: Timer doesn't exist.
E_TIMER_NOCHANNEL	Error timer: Channel doesn't exist.
E_TIMER_PERIOD	Error timer: Period too long / frequency too high.
E_TIMER_PULSE	Error timer: Pulse too long.
E_ADC_NOERROR	Error ADC: No error.
E_ADC_PORT	Error ADC: Port doesn't exist with ADC.
E_ADC_PIN	Error ADC: No ADC on pin.
E_IWDG_NOERROR	Error IWDG: No error.
E_IWDG_PERIOD	Error IWDG: Period too long.
E_FLASH_NOERROR	Error FLASH: No error.
E_FLASH_PAGE	Error FLASH: Page number out of bounds.
E_RTC_NOERROR	Error RTC: No error.
E_RTC_PRELOAD	Error RTC: Invalid period specified.
E_SPI_NOERROR	Error SPI: No error.
E_SPI_PORT	Error SPI: Port doesn't exist.

Definition at line 36 of file attiny13a_debug.h.